How to Reset Samsung Printer Firmware?

 

A firmware reset is useful if you're experiencing issues with your Samsung printer. By resetting the printer's firmware, you can often fix common problems that prevent the printer from working properly. In this article, we'll show you how to reset a Samsung printer's firmware using a simple process.

Basic Resetting

If you're having trouble with your Samsung printer, one thing you can try is resetting the firmware. This can help clear up any errors or glitches that might be causing problems. Here's how to do a basic reset of your Samsung printer firmware:

1. Start by powering off the printer.

2. Next, unplug the printer from its power source for about 60 seconds. This will help clear any residual power from the system.

3. Once the printer is off and unplugged, press and hold the “Stop/Reset” button for about 10 seconds. This will initiate the reset process.

4. Finally, turn the printer back on and plug it back into its power source. The firmware reset should now be complete.

Reset Samsung printer manually

If your Samsung printer is not working properly, you can reset the printer firmware to factory default settings. This will restore the printer to its original state and may fix some issues. To reset the firmware on your Samsung printer, follow these steps:

1. Turn off the printer and unplug the power cord.
2. Press and hold the Power button for 10 seconds.
3. While holding the Power button, plug in the power cord and wait 5 seconds.
4. Release the Power button.
5. The printer will now be reset to factory default settings.

Steps to Reset Samsung Printer Firmware

If you're having trouble with your Samsung printer, one potential solution is to reset the firmware. Firmware is the software that tells your printer how to operate, and occasionally it can become outdated or corrupt. Resetting the firmware will restore the printer to its default settings and may fix any issues you've been having.

Here's how to reset your Samsung printer's firmware:

1. Turn off the printer and unplug it from the power source.

2. Press and hold the "Stop" button on the printer for 5 seconds.

3. While still holding the "Stop" button, plug in the power cord and turn on the printer. Continue to hold the "Stop" button until the printer's display shows "Initializing..."

4. When the display changes to "Please wait..." release the "Stop" button. The firmware reset is now complete and your printer should be working properly again.

Hope the article about how to reset your Samsung printer's firmware was helpful for you. To know more about printers, assistance in printer setup and services or printer support visit www.printsupportusa.com or more for instant Samsung printer support dial the toll-free customer service number +1 8669184391 .